Eaton offer different families of plugs to meet each of your applications: the locking plug (CF), the flush plug (CB), the solid plug with hexagonal head (CK), the round plug (CQ), the hollow plug with hexagonal head (CY) and our new polyamide plug with hexagonal head (CPM).
With their Ex d (explosion-proof), Ex e (increased safety) and Ex t (enclosure protection for dust zones) protection types, these ranges can be used in the most severe ATEX environments, with a wide permissible ambient temperature range from -60 to +200°C (variable depending on the type of associated seal).
Metal plugs (with Ex d protection) are available in five formats: the locking plug (CF), the flush plug (CB), the solid plug with hexagonal head (CK), the round plug (CQ) and the hollow plug with hexagonal head (CY).
Polyamide plugs (with Ex e / Ex t protection mode) are available in two formats: Round Head (CQ) and our new hexagonal head plug (CPM).
Would you like to receive information about our products, certifications, documentations, etc.? Register by specifying "Conduit cable and wire management " in the "Products of Interest" menu.
Tamperproof Plugs are inserted from the outside with the Allen key towards the enclosure and then tightened from the inside to leave a flush finish to prevent unauthorised removal.
RX Plugs are inserted with the Allen key pointing away from the box and tightened from the outside.
A hollow version of the Hexagon Head Plug but still with Exd/Exe certification.
Hexagon Headed Plugs are inserted from the outside and fastened by means of a spanner. They can be fitted with a washer to increase the IP rating of the assembly.
Can be offered as an alternative to the Hexagon Headed version. Glass filled nylon version available in CQ type only.
Searching for other products references ?
In order to optimize and simplify our ranges, we are initiating a restructuration of our three legacy brands Capri, Raxton and Redapt. Discover the ongoing and upcoming SKUs products transitions on the dedicated page.